Flume基础知识介绍

x33g5p2x  于2020-09-30 发布在 Flume  
字(16.5k)|赞(0)|评价(0)|浏览(791)

1.Flume简介

  1. Flume提供一个分布式的，可靠的，对大数据量的日志进行高效收集、聚集、移动的服务，flume只能在Unix环境下运行
  2. Flume基于流式架构，容错性强，也很灵活简单。
  3. Flume、kafka用来实时进行数据收集，Spark、Storm用来实时处理数据，impala用来实时查询

2.Flume角色

  1. source（数据源）

用于采集数据，Source是产生数据流的地方，同时Source会将产生的数据流阐述到Channel，这个有点类似于Java IO部分的Channel

  1. Channel（管道）

用于桥接Sources和Sinks，类似于一个队列

  1. Sink（目的地）

从Channel收集数据，将数据写到一个目标源（可以是下一个Source，也可以是HDFS或者HBase）

  1. Event

传输单元，Flume数据传输的基本单元，以事件的形式将数据从源头送至目的地

3.Flume传输过程

source监控某个文件或数据流，数据源产生新的数据，拿到该数据后，将数据封装在一个Event中，并put到channel后commit提交，channel队列先进先出，sink去channel队列中拉取数据，然后写入到HDFS中

4.Flume部署

  1. 查询JAVA_HOME
echo $JAVA_HOME

显示：/opt/module/jdk1.8.0_144 /opt/module/jdk1.8.0_144

  1. 安装Flume
tar -zxvf apache-flume1.8.0-bin.tar.gz -C /opt/module/
  1. 改名
mv flume-env.sh.template flume-env.sh
  1. flume-env.sh涉及修改项
export JAVA_HOME=/opt/module/jdk1.8.0_144

5.案例

5.1 案例一：监控端口数据

  1. 目标：Flume监控一端Console，另一端Console发送消息，使被监控端实时显示

  2. 分布实现：

  3. 安装telnet工具

yum -y install telnet
  1. 创建Flume Agent配置文件flume-telnet.conf

将该文件写入flume根目录下jobconf文件夹，jobconf文件夹自行创建

#定义Agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1

#定义source
a1.sources.r1.type = netcat
a1.sources.r1.bind = bigdata113
a1.sources.r1.port = 44445

# 定义sink
a1.sinks.k1.type = logger

# 定义memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

# 双向链接
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
  1. 判断44444端口是否被占用
netstat -tunlp | grep 44445
  1. 启动fume配置文件
/opt/module/flume-1.8.0/bin/flume-ng agent /
--conf /opt/module/flume1.8.0/conf/ /
--name a1 /
--conf-file /opt/module/flume-1.8.0/jobconf/flume-telnet.conf /
-Dflume.root.logger==INFO,console
  1. 使用telnet工具向本机的44444端口发送内容
 telnet bigdata111 44445

5.2 案例二：实时读取本地文件到HDFS

  1. 创建flume-hdfs.conf文件
# Name the components on this agent
a2.sources = r2
a2.sinks = k2
a2.channels = c2
# Describe/configure the source
a2.sources.r2.type = exec
a2.sources.r2.command = tail -F /opt/Andy
a2.sources.r2.shell = /bin/bash -c

# Describe the sink
a2.sinks.k2.type = hdfs
a2.sinks.k2.hdfs.path = hdfs://bigdata111:9000/flume/%Y%m%d/%H
#上传文件的前缀
a2.sinks.k2.hdfs.filePrefix = logs-
#是否按照时间滚动文件夹
a2.sinks.k2.hdfs.round = true
#多少时间单位创建一个新的文件夹
a2.sinks.k2.hdfs.roundValue = 1
#重新定义时间单位
a2.sinks.k2.hdfs.roundUnit = hour
#是否使用本地时间戳
a2.sinks.k2.hdfs.useLocalTimeStamp = true
#积攒多少个Event才flush到HDFS一次
a2.sinks.k2.hdfs.batchSize = 1000
#设置文件类型，可支持压缩
a2.sinks.k2.hdfs.fileType = DataStream
#多久生成一个新的文件
a2.sinks.k2.hdfs.rollInterval = 600
#设置每个文件的滚动大小
a2.sinks.k2.hdfs.rollSize = 134217700
#文件的滚动与Event数量无关
a2.sinks.k2.hdfs.rollCount = 0
#最小副本数
a2.sinks.k2.hdfs.minBlockReplicas = 1

# Use a channel which buffers events in memory
a2.channels.c2.type = memory
a2.channels.c2.capacity = 1000
a2.channels.c2.transactionCapacity = 100

# Bind the source and sink to the channel
a2.sources.r2.channels = c2
a2.sinks.k2.channel = c2
  1. 执行监控配置
/opt/module/flume1.8.0/bin/flume-ng agent /
--conf /opt/module/flume1.8.0/conf/ /
--name a2 /
--conf-file /opt/module/flume1.8.0/jobconf/flume-hdfs.conf

5.3 案例三：实时读取目录文件到HDFS

  1. 目标：使用flume监听整个目录的文件

  2. 分布实现：

  3. 创建配置文件flume-dir.conf

a3.sources = r3
a3.sinks = k3
a3.channels = c3

# Describe/configure the source
a3.sources.r3.type = spooldir
a3.sources.r3.spoolDir = /opt/module/flume1.8.0/upload
a3.sources.r3.fileSuffix = .COMPLETED
a3.sources.r3.fileHeader = true
#忽略所有以.tmp结尾的文件，不上传
a3.sources.r3.ignorePattern = ([^ ]*/.tmp)

# Describe the sink
a3.sinks.k3.type = hdfs
a3.sinks.k3.hdfs.path = hdfs://bigdata111:9000/flume/%H
#上传文件的前缀
a3.sinks.k3.hdfs.filePrefix = upload-
#是否按照时间滚动文件夹
a3.sinks.k3.hdfs.round = true
#多少时间单位创建一个新的文件夹
a3.sinks.k3.hdfs.roundValue = 1
#重新定义时间单位
a3.sinks.k3.hdfs.roundUnit = hour
#是否使用本地时间戳
a3.sinks.k3.hdfs.useLocalTimeStamp = true
#积攒多少个Event才flush到HDFS一次
a3.sinks.k3.hdfs.batchSize = 100
#设置文件类型，可支持压缩
a3.sinks.k3.hdfs.fileType = DataStream
#多久生成一个新的文件
a3.sinks.k3.hdfs.rollInterval = 600
#设置每个文件的滚动大小大概是128M
a3.sinks.k3.hdfs.rollSize = 134217700
#文件的滚动与Event数量无关
a3.sinks.k3.hdfs.rollCount = 0
#最小副本数
a3.sinks.k3.hdfs.minBlockReplicas = 1

# Use a channel which buffers events in memory
a3.channels.c3.type = memory
a3.channels.c3.capacity = 1000
a3.channels.c3.transactionCapacity = 100

# Bind the source and sink to the channel
a3.sources.r3.channels = c3
a3.sinks.k3.channel = c3
  1. 执行测试：测试如下脚本后，请向upload文件夹中添加文件试试
/opt/module/flume1.8.0/bin/flume-ng agent /
--conf /opt/module/flume1.8.0/conf/ /
--name a3 /
--conf-file /opt/module/flume1.8.0/jobconf/flume-dir.conf

  1. 提示：在使用Spooling Directory Source时

  2. 不要在监控目录中创建并持续修改文件

  3. 上传完成的文件会以.COMPLETED结尾

  4. 被监控文件夹每500毫秒扫描一次文件变动

5.4 案例四：flum与flume之间数据传递：单flume多channel、sink

  1. 目标：使用flume1监控文件变动，flume1将变动内容传递给flume2，flume2负责存储到HDFS。同时flume1将变动的内容传递给flume3，flume3负责输出到local

  2. 分布实现

  3. 创建flume1.conf，用于监控某文件的变动，同时产生两个channel和两个sink分别输送给lume2和flume3

# 1.agent
a1.sources = r1
a1.sinks = k1 k2
a1.channels = c1 c2
# 将数据流复制给多个channel
a1.sources.r1.selector.type = replicating

# 2.source
a1.sources.r1.type = exec
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.shell = /bin/bash -c

# 3.sink1
a1.sinks.k1.type = avro
a1.sinks.k1.hostname = bigdata111
a1.sinks.k1.port = 4141

# sink2
a1.sinks.k2.type = avro
a1.sinks.k2.hostname = bigdata111
a1.sinks.k2.port = 4142

# 4.channel—1
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

# 4.channel—2
a1.channels.c2.type = memory
a1.channels.c2.capacity = 1000
a1.channels.c2.transactionCapacity = 100

# Bind the source and sink to the channel
a1.sources.r1.channels = c1 c2
a1.sinks.k1.channel = c1
a1.sinks.k2.channel = c2
  1. 创建flume-2.conf，用于接收flume1的event，同时产生1个channel和1个sink，将数据输送给hdfs：
# 1 agent
a2.sources = r1
a2.sinks = k1
a2.channels = c1

# 2 source
a2.sources.r1.type = avro
a2.sources.r1.bind = bigdata111
a2.sources.r1.port = 4141

# 3 sink
a2.sinks.k1.type = hdfs
a2.sinks.k1.hdfs.path = hdfs://bigdata111:9000/flume2/%H
#上传文件的前缀
a2.sinks.k1.hdfs.filePrefix = flume2-
#是否按照时间滚动文件夹
a2.sinks.k1.hdfs.round = true
#多少时间单位创建一个新的文件夹
a2.sinks.k1.hdfs.roundValue = 1
#重新定义时间单位
a2.sinks.k1.hdfs.roundUnit = hour
#是否使用本地时间戳
a2.sinks.k1.hdfs.useLocalTimeStamp = true
#积攒多少个Event才flush到HDFS一次
a2.sinks.k1.hdfs.batchSize = 100
#设置文件类型，可支持压缩
a2.sinks.k1.hdfs.fileType = DataStream
#多久生成一个新的文件
a2.sinks.k1.hdfs.rollInterval = 600
#设置每个文件的滚动大小大概是128M
a2.sinks.k1.hdfs.rollSize = 134217700
#文件的滚动与Event数量无关
a2.sinks.k1.hdfs.rollCount = 0
#最小副本数
a2.sinks.k1.hdfs.minBlockReplicas = 1


# 4 channel
a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

#5 Bind 
a2.sources.r1.channels = c1
a2.sinks.k1.channel = c1
  1. 创建flume-3.conf，用于接收flume1的event，同时产生1个channel和1个sink，将数据输送给本地目录：
#1 agent
a3.sources = r1
a3.sinks = k1
a3.channels = c1

# 2 source
a3.sources.r1.type = avro
a3.sources.r1.bind = bigdata111
a3.sources.r1.port = 4142

#3 sink
a3.sinks.k1.type = file_roll
#备注：此处的文件夹需要先创建好
a3.sinks.k1.sink.directory = /opt/flume3

# 4 channel
a3.channels.c1.type = memory
a3.channels.c1.capacity = 1000
a3.channels.c1.transactionCapacity = 100

# 5 Bind
a3.sources.r1.channels = c1
a3.sinks.k1.channel = c1

  1. 提示：输出的本地目录必须是已经存在的目录，如果该目录不存在，并不会创建新的目录。

  2. 执行测试：分别开启对应flume-job（依次启动flume2，flume3，flume1），同时产生文件变动并观察结果：

$ bin/flume-ng agent --conf conf/ --name a1 --conf-file jobconf/flume2.conf

$ bin/flume-ng agent --conf conf/ --name a2 --conf-file jobconf/flume3.conf

$ bin/flume-ng agent --conf conf/ --name a3 --conf-file jobconf/flume1.conf

5.5 案例五：Flume与Flume之间数据传递，多Flume汇总数据到单Flume

  1. 目标：flume11监控文件hive.log，flume-22监控某一个端口的数据流，flume11与flume-22将数据发送给flume-33，flume33将最终数据写入到HDFS。

  2. 分布实现：

  3. 创建flume11.conf，用于监控hive.log文件，同时sink数据到flume-33：

# 1 agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1

# 2 source
a1.sources.r1.type = exec
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.shell = /bin/bash -c

# 3 sink
a1.sinks.k1.type = avro
a1.sinks.k1.hostname = bigdata111
a1.sinks.k1.port = 4141

# 4 channel
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

# 5. Bind
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
  1. 创建flume-22.conf，用于监控端口44444数据流，同时sink数据到flume-33：
# 1 agent
a2.sources = r1
a2.sinks = k1
a2.channels = c1

# 2 source
a2.sources.r1.type = netcat
a2.sources.r1.bind = bigdata111
a2.sources.r1.port = 44444

#3 sink
a2.sinks.k1.type = avro
a2.sinks.k1.hostname = bigdata111
a2.sinks.k1.port = 4141

# 4 channel
a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

# 5 Bind
a2.sources.r1.channels = c1
a2.sinks.k1.channel = c1
  1. 创建flume33.conf，用于接收flume11与flume22发送过来的数据流，最终合并后sink到HDFS：
# 1 agent
a3.sources = r1
a3.sinks = k1
a3.channels = c1

# 2 source
a3.sources.r1.type = avro
a3.sources.r1.bind = bigdata111
a3.sources.r1.port = 4141

# 3 sink
a3.sinks.k1.type = hdfs
a3.sinks.k1.hdfs.path = hdfs://bigdata111:9000/flume3/%H
#上传文件的前缀
a3.sinks.k1.hdfs.filePrefix = flume3-
#是否按照时间滚动文件夹
a3.sinks.k1.hdfs.round = true
#多少时间单位创建一个新的文件夹
a3.sinks.k1.hdfs.roundValue = 1
#重新定义时间单位
a3.sinks.k1.hdfs.roundUnit = hour
#是否使用本地时间戳
a3.sinks.k1.hdfs.useLocalTimeStamp = true
#积攒多少个Event才flush到HDFS一次
a3.sinks.k1.hdfs.batchSize = 100
#设置文件类型，可支持压缩
a3.sinks.k1.hdfs.fileType = DataStream
#多久生成一个新的文件
a3.sinks.k1.hdfs.rollInterval = 600
#设置每个文件的滚动大小大概是128M
a3.sinks.k1.hdfs.rollSize = 134217700
#文件的滚动与Event数量无关
a3.sinks.k1.hdfs.rollCount = 0
#最小冗余数
a3.sinks.k1.hdfs.minBlockReplicas = 1

# 4 channel
a3.channels.c1.type = memory
a3.channels.c1.capacity = 1000
a3.channels.c1.transactionCapacity = 100

# 5 Bind
a3.sources.r1.channels = c1
a3.sinks.k1.channel = c1
  1. 执行测试：分别开启对应flume-job（依次启动flume-33，flume-22，flume11），同时产生文件变动并观察结果：
$ bin/flume-ng agent --conf conf/ --name a3 --conf-file jobconf/flume33.conf
$ bin/flume-ng agent --conf conf/ --name a2 --conf-file jobconf/flume22.conf
$ bin/flume-ng agent --conf conf/ --name a1 --conf-file jobconf/flume11.conf
  1. 数据发送
  • telnet bigdata111 44444打开后发送5555555
  • 在/opt/Andy 中追加666666

6.Flume拦截器

6.1 时间戳拦截器

Timestamp.conf

#1.定义agent名， source、channel、sink的名称
a4.sources = r1
a4.channels = c1
a4.sinks = k1

#2.具体定义source
a4.sources.r1.type = spooldir
a4.sources.r1.spoolDir = /opt/module/flume-1.8.0/upload

#定义拦截器，为文件最后添加时间戳
a4.sources.r1.interceptors = i1
a4.sources.r1.interceptors.i1.type = org.apache.flume.interceptor.TimestampInterceptor$Builder

#具体定义channel
a4.channels.c1.type = memory
a4.channels.c1.capacity = 10000
a4.channels.c1.transactionCapacity = 100


#具体定义sink
a4.sinks.k1.type = hdfs
a4.sinks.k1.hdfs.path = hdfs://bigdata111:9000/flume-interceptors/%H
a4.sinks.k1.hdfs.filePrefix = events-
a4.sinks.k1.hdfs.fileType = DataStream

#不按照条数生成文件
a4.sinks.k1.hdfs.rollCount = 0
#HDFS上的文件达到128M时生成一个文件
a4.sinks.k1.hdfs.rollSize = 134217728
#HDFS上的文件达到60秒生成一个文件
a4.sinks.k1.hdfs.rollInterval = 60

#组装source、channel、sink
a4.sources.r1.channels = c1
a4.sinks.k1.channel = c1

启动命令

/opt/module/flume-1.8.0/bin/flume-ng agent -n a4 /
-f /opt/module/flume-1.8.0/jobconf/flume-interceptors.conf /
-c /opt/module/flume-1.8.0/conf /
-Dflume.root.logger=INFO,console

6.2 主机名拦截器

Host.conf

#1.定义agent
a1.sources= r1
a1.sinks = k1
a1.channels = c1

#2.定义source
a1.sources.r1.type = exec
a1.sources.r1.channels = c1
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
a1.sources.r1.interceptors.i1.type = host

#参数为true时用IP192.168.1.111，参数为false时用主机名，默认为true
a1.sources.r1.interceptors.i1.useIP = false
a1.sources.r1.interceptors.i1.hostHeader = agentHost

 #3.定义sinks
a1.sinks.k1.type=hdfs
a1.sinks.k1.channel = c1
a1.sinks.k1.hdfs.path = hdfs://bigdata111:9000/flumehost/%H
a1.sinks.k1.hdfs.filePrefix = Andy_%{agentHost}
#往生成的文件加后缀名.log
a1.sinks.k1.hdfs.fileSuffix = .log
a1.sinks.k1.hdfs.fileType = DataStream
a1.sinks.k1.hdfs.writeFormat = Text
a1.sinks.k1.hdfs.rollInterval = 10
a1.sinks.k1.hdfs.useLocalTimeStamp = true
 
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
 
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

启动命令：

bin/flume-ng agent -c conf/ -f jobconf/host.conf -n a1 -Dflume.root.logger=INFO,console

6.3UUID拦截器

uuid.conf

a1.sources = r1
a1.sinks = k1
a1.channels = c1

a1.sources.r1.type = exec
a1.sources.r1.channels = c1
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
#type的参数不能写成uuid，得写具体，否则找不到类
a1.sources.r1.interceptors.i1.type = org.apache.flume.sink.solr.morphline.UUIDInterceptor$Builder
#如果UUID头已经存在,它应该保存
a1.sources.r1.interceptors.i1.preserveExisting = true
a1.sources.r1.interceptors.i1.prefix = UUID_

a1.sinks.k1.type = logger

a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

启动命令

# bin/flume-ng agent -c conf/ -f jobconf/uuid.conf -n a1 -Dflume.root.logger==INFO,console

6.4 查询替换拦截器

search.conf

#1 agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1
#2 source
a1.sources.r1.type = exec
a1.sources.r1.channels = c1
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
a1.sources.r1.interceptors.i1.type = search_replace

#遇到数字改成itstar，A123会替换为Aitstar
a1.sources.r1.interceptors.i1.searchPattern = [0-9]+
a1.sources.r1.interceptors.i1.replaceString = itstar
a1.sources.r1.interceptors.i1.charset = UTF-8

#3 sink
a1.sinks.k1.type = logger

#4 Chanel
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

#5 bind
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

启动命令

# bin/flume-ng agent -c conf/ -f jobconf/search.conf -n a1 -Dflume.root.logger=INFO,console

6.5 正则过滤拦截器

filter.conf

#1 agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1

#2 source
a1.sources.r1.type = exec
a1.sources.r1.channels = c1
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
a1.sources.r1.interceptors.i1.type = regex_filter
a1.sources.r1.interceptors.i1.regex = ^A.*
#如果excludeEvents设为false,表示过滤掉不是以A开头的events。如果excludeEvents设为true，则表示过滤掉以A开头的events。
a1.sources.r1.interceptors.i1.excludeEvents = true

a1.sinks.k1.type = logger

a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

# bin/flume-ng agent -c conf/ -f jobconf/filter.conf -n a1 -Dflume.root.logger=INFO,console

6.6 正则抽取拦截器

extractor.conf

#1 agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1

#2 source
a1.sources.r1.type = exec
a1.sources.r1.channels = c1
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
a1.sources.r1.interceptors.i1.type = regex_extractor
a1.sources.r1.interceptors.i1.regex = hostname is (.*?) ip is (.*)
a1.sources.r1.interceptors.i1.serializers = s1 s2
a1.sources.r1.interceptors.i1.serializers.s1.name = cookieid
a1.sources.r1.interceptors.i1.serializers.s2.name = ip

a1.sinks.k1.type = logger

a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

注：正则抽取拦截器的headers不会出现在文件名和文件内容中

启动命令

# bin/flume-ng agent -c conf/ -f jobconf/extractor.conf -n a1 -Dflume.root.logger=INFO,console

7.Flume自定义拦截器

字母小写变大写

  1. pom.xml
 <dependencies>
  <!-- flume核心依赖 -->
  <dependency>
<groupId>org.apache.flume</groupId>
<artifactId>flume-ng-core</artifactId>
<version>1.8.0</version>
  </dependency>
 </dependencies>
 <build>
  <plugins>
<!-- 打包插件 -->
<plugin>
 <groupId>org.apache.maven.plugins</groupId>
 <artifactId>maven-jar-plugin</artifactId>
 <version>2.4</version>
 <configuration>
  <archive>
<manifest>
 <addClasspath>true</addClasspath>
 <classpathPrefix>lib/</classpathPrefix>
 <mainClass></mainClass>
</manifest>
  </archive>
 </configuration>
</plugin>
<!-- 编译插件 -->
<plugin>
 <groupId>org.apache.maven.plugins</groupId>
 <artifactId>maven-compiler-plugin</artifactId>
 <configuration>
  <source>1.8</source>
  <target>1.8</target>
  <encoding>utf-8</encoding>
 </configuration>
</plugin>
  </plugins>
 </build>
  1. 自定义实现拦截器
import org.apache.flume.Context;
import org.apache.flume.Event;
import org.apache.flume.interceptor.Interceptor;
 
import java.util.ArrayList;
import java.util.List;
 
public class MyInterceptor implements Interceptor {
 @Override
 public void initialize() {
 }
 
 @Override
 public void close() {
 }
 
 /**
  * 拦截source发送到通道channel中的消息
  *
  * @param event 接收过滤的event
  * @return event 根据业务处理后的event
  */
 @Override
 public Event intercept(Event event) {
  // 获取事件对象中的字节数据
  byte[] arr = event.getBody();
  // 将获取的数据转换成大写
  event.setBody(new String(arr).toUpperCase().getBytes());
  // 返回到消息中
  return event;
 }
 // 接收被过滤事件集合
 @Override
 public List<Event> intercept(List<Event> events) {
  List<Event> list = new ArrayList<>();
  for (Event event : events) {
list.add(intercept(event));
  }
  return list;
 }
 
 public static class Builder implements Interceptor.Builder {
  // 获取配置文件的属性
  @Override
  public Interceptor build() {
return new MyInterceptor();
  }
 
  @Override
  public void configure(Context context) {
 
  }
 }

使用Maven做成Jar包，在flume的目录下mkdir jar，上传此jar到jar目录中

  1. Flume配置文件

ToUpCase.conf

#1.agent 
a1.sources = r1
a1.sinks =k1
a1.channels = c1
 
 
# Describe/configure the source
a1.sources.r1.type = exec
a1.sources.r1.command = tail -F /opt/Andy
a1.sources.r1.interceptors = i1
#全类名$Builder
a1.sources.r1.interceptors.i1.type = ToUpCase.MyInterceptor$Builder
 
# Describe the sink
a1.sinks.k1.type = hdfs
a1.sinks.k1.hdfs.path = /ToUpCase1
a1.sinks.k1.hdfs.filePrefix = events-
a1.sinks.k1.hdfs.round = true
a1.sinks.k1.hdfs.roundValue = 10
a1.sinks.k1.hdfs.roundUnit = minute
a1.sinks.k1.hdfs.rollInterval = 3
a1.sinks.k1.hdfs.rollSize = 20
a1.sinks.k1.hdfs.rollCount = 5
a1.sinks.k1.hdfs.batchSize = 1
a1.sinks.k1.hdfs.useLocalTimeStamp = true
#生成的文件类型，默认是 Sequencefile，可用 DataStream，则为普通文本
a1.sinks.k1.hdfs.fileType = DataStream
 
# Use a channel which buffers events in memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
 
# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
  1. 运行命令：
bin/flume-ng agent -c conf/ -n a1 -f jar/ToUpCase.conf -C jar/Flume_Andy-1.0-SNAPSHOT.jar -Dflume.root.logger=DEBUG,console

内容来源于网络，如有侵权，请联系作者删除！

flume

相关文章

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新文章

    更多
    • 蜀ICP备2022004421号-2 NULL123 https://www.null123.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com