下午好,我正在使用stm32蓝丸usb接口,开发环境“iar”。问题是,当我通过应用程序连接时,箭头后面的数字“3”并没有变为数字“50”,而是相反的显示在下面!见图1.2。我是按照协议工作的。
你如何做到这一点?我正在使用controlp5库和cp5.addnumberbox。
“iar”中的数据。
int Bullet = 50; // variable for result
sprintf((char *)str, "(,%d,-Ђ",Bullet); // sending a command with data to stm32.
在displaydata选项卡的代码中,行“case 40”是符号(该命令也可以使用虚拟com端口通过终端发送)。命令:(,50,!图3。
我得把整个小项目布置好让你看看。
通信接口1:
import processing.serial.*;
import controlP5.*;
ControlP5 cp5;
DropdownList serialPortsList;
Serial serialPort;
final int BAUD_RATE = 9600;
char parity = 'N';
int dataBits = 8;
float stopBits = 1.0;
public void setup() {
background(50);
size(700, 420, P3D);
surface.setTitle("TEST");
surface.setResizable(false);
setupUI();
smooth();
frameRate(30);
writeOutgioing[lengthmas-1]=1;
String[] portNames = Serial.list();
//serialPort.clear(); // Why does not it work?
for (int i = 0; i < portNames.length; i++) serialPortsList.addItem(portNames[i], i);
}
public void toplug (int theValue)
{ // Start button on click sends a commad 1.
println("Button click events: "+theValue);
strata =!strata;
if (!strata) {
connection.setLabel("Пуск");
serialPort.dispose();
Vin.setText("Voltage K.V - ");
inputPULI.setLabel("Bullet");
} else {
connection.setLabel("СТОП");
serialports((int)serialPortsList.getValue());
writeOutgioing[0]=1;
writeOut();
}
}
public void serialports(int theValue) {
try {
serialPort = new Serial(this, Serial.list()[theValue], BAUD_RATE, parity, dataBits, stopBits);
serialPort.bufferUntil('\n');
println("COM connected: "+ Serial.list()[theValue] );
/*Send.unlock();
connection.unlock();*/ // locking buttons in applications if not connected via rs-232.
}
catch(Exception e) {
System.err.println("Error opening serial port" + Serial.list()[theValue]);
e.printStackTrace();
}
}
/*void controlEvent(ControlEvent event){
println(event.getController().getName(),"changed value to",event.getValue(),"inputPULI = ",PUL,"inputNapryzenieKV = ",NapryzenieKV,"CheckBoxuvum= ",
UV/UM,"P4 = ",std2,);
}*/
显示数据:
void Displaydata() {
switch(x)
{
case 20:
// What to write?
// label(testRead[1]+" Мин."); // ImageButton
// min=testRead[1];
break;
case 30:
// What to write?
// P4.setText("std2"+ testRead[1]); // CheckBox
break;
case 40:
inputPULI.setLabel("Bullet: " + testRead[1] );
break;
case 70:
inputNapryzenieKV.setLabel("Voltage: " + testRead[1] );
break;
case 60:
Vin.setText("Voltage K.V: " + testRead[1] + " " + testRead[2]);
break;
case 50:
// What to write?
//CheckBoxuvum.setText("UV/UM - " +testRead[1] ); // RadioButton
break;
default:
println("DisplayData(): no case selected.");
break; // technically not necessary, but I like my switches tidy
}
}
图形用户界面:
int PUL;
float NapryzenieKV;
boolean strata=false;
ImageButton button;
Numberbox inputPULI;
Numberbox inputNapryzenieKV;
RadioButton CheckBoxuvum;
CheckBox P4;
Textlabel Vin;
Button connection;
Button Send;
public void setupUI()
{
cp5 = new ControlP5(this);
PFont fontn = createFont("Times New Roman", 18);
PFont p = createFont("Times New Roman", 18);
ControlFont font=new
ControlFont(p);
cp5.setFont(font);
connection = cp5.addButton("toplug")
.setCaptionLabel("ПУСК")
.setPosition(387, 30)
.setSize(150, 30);
serialPortsList = cp5.addDropdownList("Порт")
.setPosition(130, 30)
.setSize(150, 200)
.setItemHeight(30)
.setBarHeight(30);
PImage[] imgs = {loadImage("button101.png"), loadImage("button102.png"), loadImage("button103.png")};
Send = cp5.addButton("toapply")
//.setCaptionLabel("Apply")
//.setPosition(510, 370)
//.setSize(150, 30);
.setPosition(590, 330)
.setImages(imgs)
.updateSize();
//.lock()
Vin = cp5.addTextlabel("naprazhenie kondencatora")
.setText("Voltage K.V")
.setFont(p)
.setColor(color(#00ffff))
.setPosition(45, 320);
CheckBoxuvum = cp5.addRadioButton("UV/UM")
.setPosition(155, 360)
.setSize(15, 15)
.setColorActive(color(255))
.setItemsPerRow(2)
.setSpacingColumn(85)
.addItem("+", 1)
.addItem("-", 2);
P4 = cp5.addCheckBox("std2")
.setPosition(150, 190)
.setSize(15, 15)
.setItemsPerRow(1)
.setSpacingColumn(30)
.setSpacingRow(20)
.addItem("Check", 2);
inputPULI = cp5.addNumberbox("PUL")
.setLabel("Bullet")
.setPosition(220, 220)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setDirection(Controller.HORIZONTAL)
.setRange(1, 199)
.setValue(3);
Label labelinputPULI = inputPULI.getCaptionLabel();
labelinputPULI.setFont(font);
labelinputPULI.setColor(color(#00ffff));
labelinputPULI.toUpperCase(false);
labelinputPULI.setText("Bullet");
labelinputPULI.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputPULI.getStyle().setPaddingLeft(-25);
inputNapryzenieKV = cp5.addNumberbox("NapryzenieKV")
.setLabel("Voltage")
.setPosition(150, 270)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setMin(25)
.setMax(99)
.setMultiplier(0.01)
.setDirection(Controller.HORIZONTAL)
.setValue(25);
Label labelinputNapryzenieKV = inputNapryzenieKV.getCaptionLabel();
labelinputNapryzenieKV.setFont(font);
labelinputNapryzenieKV.setColor(color(#00ffff));
labelinputNapryzenieKV.toUpperCase(false);
labelinputNapryzenieKV.setText("Напряжение");
labelinputNapryzenieKV.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputNapryzenieKV.getStyle().setPaddingLeft(-45);
textFont(fontn);
{
// button dimensions
int w = 99;
int h = 25;
// test with generated images
button = new ImageButton(555, 230, w, h,
new PImage[]{
loadImage("0.png"), // off
loadImage("1.png"), // 10
loadImage("2.png"), // 20
loadImage("3.png"), // 30
loadImage("4.png"), // 40
loadImage("5.png"), // 50
loadImage("6.png"), // 60
});
}
}
void mousePressed() {
button.mousePressed(mouseX, mouseY);
println(button.min);
}
// test images to represent loaded state images
PImage getImage(int w, int h, int c) {
PImage img = createImage(w, h, RGB);
java.util.Arrays.fill(img.pixels, c);
img.updatePixels();
return img;
}
// make a custom image button class
class ImageButton {
// minutes is the data it stores
int min = 0;
// images for each state
PImage[] stateImages;
// which image to display
int stateIndex;
// position
int x, y;
// dimensions: width , height
int w, h;
// text to display
String label = "ВЫКЛ";
ImageButton(int x, int y, int w, int h, PImage[] stateImages) {
this.x = x;
this.y = y;
this.w = w;
this.h = h;
this.stateImages = stateImages;
}
void mousePressed(int mx, int my) {
// check the cursor is within the button bounds
boolean isOver = ((mx >= x && mx <= x + w) && // check horizontal
(my >= y && my <= y + h) ); // check vertical
if (isOver) {
min += 10;
stateIndex++;
if (min>60) {
min = 0;
stateIndex = 0;
label = "ВЫКЛ";
} else {
label = (str(min) + "Мин");
}
}
}
void draw() {
// if the images and index are valid
if (stateImages != null && stateIndex < stateImages.length) {
image(stateImages[stateIndex], x, y, w, h);
} else {
println("error displaying button state image");
println("stateImages: ");
printArray(stateImages);
println("stateIndex: " + stateIndex);
}
// display text
//text(label, x + 17, y + h - 8);
}
}
void controlEvent(ControlEvent theEvent) {
if (theEvent.isFrom(CheckBoxuvum)) {
//myColorBackground = 0;
print("got an event from "+CheckBoxuvum.getName()+"\t\n");
// checkbox uses arrayValue to store the state of
// individual checkbox-items. usage:
println(CheckBoxuvum.getArrayValue());
int col = 0;
for (int i=0; i<CheckBoxuvum.getArrayValue().length; i++) {
int n = (int)CheckBoxuvum.getArrayValue()[i];
print(n);
if (n==1) {
//myColorBackground += CheckBoxuvum.getItem(i).internalValue();
}
}
println();
}
if (theEvent.isGroup()) {
// check if the Event was triggered from a ControlGroup
println("event from group : "+theEvent.getGroup().getValue()+" from "+theEvent.getGroup());
} else if (theEvent.isController()) {
println("event from controller : "+theEvent.getController().getValue()+" from "+theEvent.getController());
}
}
协议:
int lengthmas = 7;
int RC = 0x21; // -128 separating byte в java
int[] writeOutgioing = new int[lengthmas];
String incomingData= null;
String outgoingData=null;
String[] testRead = new String[lengthmas];
int x;
void readInc() {
while ( serialPort.available() > 0)
{
incomingData = serialPort.readStringUntil(RC);
testRead = split (incomingData, ',' );
if (testRead != null)
{
x = (int) testRead[0].charAt(0);
Displaydata();
}
}
}
void writeOut() {
outgoingData=str(writeOutgioing[0])+str(writeOutgioing[1])+str(writeOutgioing[2])+str(writeOutgioing[3])+str(writeOutgioing[4])+str(writeOutgioing[5])+str(writeOutgioing[6]); // sending data as a string.
serialPort.write(outgoingData);
}
发送数据:
public void toapply()
{
}
回路:
void draw()
{
background(50);
button.draw();
if (strata)
{
readInc();
}
}
代码:
inputPULI = cp5.addNumberbox("PUL")
.setLabel("Bullet")
.setPosition(220, 220)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setDirection(Controller.HORIZONTAL)
.setRange(1, 199)
.setValue(3);
Label labelinputPULI = inputPULI.getCaptionLabel();
labelinputPULI.setFont(font);
labelinputPULI.setColor(color(#00ffff));
labelinputPULI.toUpperCase(false);
labelinputPULI.setText("Bullet");
labelinputPULI.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputPULI.getStyle().setPaddingLeft(-25);
1条答案
按热度按时间55ooxyrt1#
我自己想出来的,我不得不写setlabel->setvaluelabel